Перейти к содержимому
[Grower Бот]

Trimming Weed: How To Trim Your Marijuana Plant In 5 Easy Steps

Рекомендуемые сообщения

Trimming weed from a jar

Trimming weed may seem like a daunting activity. But take it from the professionals — it’s not as hard as all that. In fact, it’s pretty simple, and we’re going to teach you how.

In this article, we’ll show you the best way to trim your weed for maximum potency. We’ll even tell you how you can use all the stuff you trim off your bud to make edibles, creams, and other fun stuff.

Why Trimming Weed Is Essential

Trimming weed is essential during the harvesting process because it reduces the harshness of the finished product.

Leaves contain more chlorophyll than the flowers (buds), so they will always feel more acidic in your throat when burned. Getting rid of those leaves will make the buds smoother and easier to smoke.

Marijuana leaf

Trimming weed also improves THC concentration. Leaves, by nature, have a lower concentration of trichomes.

If you leave the leaves on the bud, gram-for-gram there will be fewer trichomes and, as a result, less THC in the finished product. That can affect potency, flavor, and the overall experience of burning down.

How To Trim Your Marijuana Plant

Supplies For Trimming Weed

  • Pruning snips
  • Pruning shears
  • Disposable rubber gloves (thin latex medical gloves, not the thick dishwashing gloves)
  • Three trays or cookie sheets (one for the cut branch, one for the trimmings, and one for your finished bud)
  • Rubbing alcohol (for cleaning)
  • Rag (for cleaning)

Trimming Weed In 5 Easy Steps

Before we begin, we’re going to suggest that you leave the pot plant standing for the time being. Cut off one branch at a time so you can get the hang of trimming weed before you go all-in and harvest the whole plant.

1a) Set Up Your Weed-Trimming Area

Give yourself plenty of room when setting up your area for trimming weed. A kitchen table works well in this regard (minus the cat, of course).

Table for trimming weed

Having done this many, many times, we recommend having some type of entertainment on hand. Trimming weed in a quiet environment can get extremely boring and tedious really quickly.

If you have a large coffee table in front of your TV, clear it off and set up your trimming area there. Or maybe you have a folding table you use for cards or puzzles. Spread your trays and tools there and go to work.

If all else fails, just sit on the floor. That said, you will need to be comfortable because you’re going to be here for a while.

This is a great time to binge watch one of your favorite shows or movie series. Preferably, something you’ve already seen since your attention is going to be on trimming weed.

1b) Ventilate

Trimming weed is a smelly job (good smelly, not bad), so it’s a smart idea to run an exhaust fan (crack a window, yo) or a carbon scrubber to reduce the dank odor. This is an optional step, but let’s just say that you’ve been warned.

2) Don Your Gloves

This step is also optional — but highly recommended. Trimming weed is a sticky job, and resin will get everywhere. If you don’t want to constantly wash your hands throughout the process, keep a box of disposable latex gloves nearby.

If you opt for the ungloved route, be sure to have plenty of rubbing alcohol on hand to cut the sticky icky off your digits. Trust us, soap and water don’t cut it.

If you trade in your used gloves for a fresh pair, set the old pair in a bowl or at the corner of your tray. Then when you’re done trimming weed, see if you can extract any of the material off the surface of the gloves.

Why would you want to go to all that trouble? Because that stuff is basically hash and will make a nice addition to your next smoke sesh.

3) Cut A Branch Off Your Plant

Now that you’re all ready to go, cut a branch off your plant and lay it on one of the cookie trays.

Some of the branches on your cannabis plant will be pretty thick. Scissors won’t do. We recommend buying a sturdy pair of pruning shears (like the ones pictured below) that you use exclusively for trimming weed.

Tool for trimming weed

These shears are made for cutting thicker branches and stems, unlike snips that you’ll use later for the finer work of cutting off the leaves and such.

In the absence of pruning shears, you can use a knife to cut a branch off the main stem, but shears will make it quick and easy. If you skip the shears and go with the knife, at least use a serrated blade to chew through the stem.

When you’re choosing where to cut, only remove branches that you can handle easily. We suggest keeping the length of the branches you cut to between 18 and 24 inches if possible.

4) Remove The Large Fan Leaves

“How can you tell the difference between a fan leaf and all the other leaves on the marijuana plant?” you ask. The fan leaves look like every picture you’ve ever seen of a pot leaf.

Chances are, they’ll look something like this:

Fan leaves on a marijuana plant

They’ll be growing out of the buds at the ends of the branches. When trimming weed, you can usually remove these leaves by hand. The stems will snap off with a little pressure from your fingers.

This is where it’s good to have on latex gloves because your fingers are going to come in contact with a lot of resin.

Don’t discard these leaves. They’re good for other things (we’ll talk about that at the end). Just pile them on one of the empty cookie trays for now.

5) Snip Off The Sugar Leaves

After you remove the fan leaves, you’ll be able to see smaller leaves sticking out of the bud. Typically, just the tips of those leaves will emerge from the bud and you won’t be able to see (or get ahold of) the stems.

This is where your smaller pruning snips come into play.

Snips for trimming weed

Pruning snips (like the ones shown above) have a much smaller blade than pruning shears and are meant for the delicate work of cutting small stems, flowers, and leaves. Pruning snips are usually spring loaded and don’t require a lot of hand strength to use.

This is a good thing because you’re going to be snipping a lot of stuff away from the bud while you’re trimming weed.

With snips in hand, cut the sugar leaves so that they’re flush with the bud itself. Do your clipping over the cookie tray that’s already holding your fan leaves. Remember, you can use all this plant matter later while you’re waiting for your harvest to be ready for consumption.

If your snips get too sticky to use while you’re trimming weed, scrape off as much of the resin as possible and save it for later. Then clean the blades with rubbing alcohol and a rag.

When you’re done trimming weed, the finished bud will look something like this:

Marijuana bud after trimming weed

Try not to cut the actual bud, but get rid of as many of the leaves as possible. It’s all right if you leave some (especially on your first try), but any leaf matter left on the bud will make for harsher smoke when you decarboxylate.

Place the finished branch on the third cookie sheet, and go back to your plant (with shears in hand) for a new piece to trim. Repeat this process until you’ve removed all the branches from your pot plant.

What To Do After Trimming Weed

Unfortunately, trimming weed is only the first step in producing a finished product (i.e., ready to smoke). We know the wait can be hard, but the next step — drying and curing — is crucial if you want a smooth-tasting product with plenty of cannabinoids and terpenes intact.

Drying and curing involves hanging your nugs in a temperature- and humidity-controlled environment for a week or so, then transferring them to storage containers to cure for anywhere from one month to six months.

But wait! That stuff you cut off while trimming weed is useful too. And it gives you something to do while you wait for the buds to cure. Here’s how you can get the most out of every part of the marijuana plant.

  • Stalks — Toss them in a grinder or chipper to make mulch.
  • Fan leaves — Juice them or brew them as weed tea.
  • Sugar leaves — Cook in cannabutter.
  • Roots — Brew into tea or prepare as a topical cream.

Honestly, there’s so much you can do with the cannabis plant that once you start looking, you’ll be amazed at the awesome things canna-enthusiasts have come up with (smoking meat with the stems!).

Do a little research and try out your favorites. It really does bring a whole new meaning to the term Reuse/Recycle.

Поделиться сообщением

Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта.

Зарегистрировать аккаунт


Уже зарегистрированы? Войдите здесь.

Войти сейчас

  • Похожие публикации

    • Автор: sim
      Генетика: (G13 Hash Plant x Ruderalis)x(Northern Light#3)
      Разновидность: Индика раннецвет
      Высота растения: 150-200 см.
      Урожайность: 100-350 гр/растение
      Сбор урожая: конец сентября

      Hash Plant v.2 - Раннецветущий гибрид. (Fast version)

      Это вторая убыстренная версия раннецвета Hash Plant, позволит собрать урожай еще быстрее!
      Растение позволяет легко получать гашиш превосходного качества. Имеет настоящее афганское происхождение. В первую очередь хорош тем, что является замечательным материалом для производства гашиша. Одним словом, если вы хотите выращивать коноплю для получения ярких и незабываемых впечатлений, то данный сорт для этого подойдет как нельзя лучше.
      Возможны проявления полностью автоцветущиего фенотипа, который намного крупнее обычных автоцветов. Его главная отличительная черта – это быстрое цветение и обильно покрытые смолистыми шишками листья. Смола своим ароматом не вызывает сомнений, что представляет собой высокое качество и отменный результат. Это замечательный выбор для ценителей гашиша и индики. В меру устойчив к паразитам и плесени. В открытом грунте растение может быть полностью готово к сбору урожая в середине - конце сентября, при условии высадки рассады в возрасте 2-х недель ( 1-5 мая).
      (высадку этого раннецвета в это время можно делать на всех широтах вплоть до 57 с.ш).
      Эффект: Вечерний, раслабляющий плотно опьяняющий эффект индики. Аромат шишек: манго, фруктовый гашиш, сладко-пряный аромат и вкус.

      Отправка только в пределах Украины Новой почтой и Укр почтой.
      Для связи:
      VIPole: -  sim777
      Скайп : -  sim.seeds
      E-mail  - [email protected]
      Или в  здесь ЛС.

      Просмотреть полное объявление в Барахолке
    • Автор: North Bulk Organization
      Всем привет,  Бро!

      Посеял в начале мая 4  сорта  высокорослых автиков   - Power Plant, Magnesia Haze, Giant But, Critical Jack .  Возможно некоторые так называемые суперавто,  будем проверять.

      3 ряда по 20  метров,  и 4 ряда по 10 метров. Такого вида получилась поляна.

      Копалось лопатой вручную.  Такой дурнычки как проращивание  не использую, сеялось  прямо в грунт. Весна была очень влажная  и холодная потому на максимально мелкую глубину высевалось. Удобрения стандартные минеральные комплексные Яра Мила, смешанная с карбамидом приблизительно 50/50.  Полива обычно на полянах никакого не использую.

      Вот такую поляну вырубил в лесу.  Много конешно пришлось проделать работы по вырубке огромных кустов верболоза (козья ива),  также  и  некоторые деревья спиливал. И разрубил мечете - себе колено  до кости. Много было потерянно времени на лечение,  ну больше недели не выдержал, немного зажило и опять в поля..

      Всего было высеяно несколько сотен  семян на етой поляне,  но будет около сотни вижу,  сейчас считать геморрно и много отнимет времени,  будем смотреть позже по  результату (цыплят по осени считают).  Произошло ето потому что огромное засилье слизней в етом году, и они огромного размера,  таких редко видел, как большие гусеницы. Видно етому поспособствовала аномально влажная и затяжная весна. Даже сейчас видел свежие каннабиски скошенные лежали еще зеленные. Хотя до всходов разбрасываю от слизней гранулы польские  «Снаколь» Bros. Но  для подстраховки двух разных производителей,  и по виду отличаются. Разбрасываю их обычно жменями сверх нормы хотя там по инструкции достаточно щепотки. Но слизней столько что их надо  бы в несколько заходов сыпать,  но  некогда.


    • Автор: Сильвестер
      Auto Power Plant Fem. От grower.win Освещения. Днат 600 ватт + Култюб 150мм. Led Apollo 6/Marshydro 300. Площадь 1х3х2,5 Метра Самодельный шкаф. Вентиляция Td Silent 500/150/160. Пасивный вдув. На обдув 3х скоростой домашний вент. Фильтр 425 куб. Can-lite425s Удобрения базовая линейка флора серии, Gro Micro bloom. Тип субстрата. Земля+кокос+вермукулит для Power Plant. Самодельная доска с прорезями в середине по 8 см чтобы стекало все в тару.
      Всем доброго времени суток, ещё 2 семя замочены в диски так как кошка села 2 ростка. Семки замочил 3.01.19, 1 семя скинула каску 07.01.2019,  и две 08.01.19 утром. Так как котэ сожрал 2 растка 1 сатори рег бунусная и, power plant 1 семя. Замочил допалнительно 2 семя power plant 1 скинула каску 16.01.19 и,  17.01.19. 1 
          ( Вегетация POWER PLANT AUTO 2x 09.01.19 )
    • Автор: [Grower Бот]
      Don’t let your lack of knowledge about how to clean a grinder be a deterrent to maintaining your cannabis equipment. There are plenty of good reasons to keep your grinder clean, and it’s really not that difficult when you get the hang of it.
      In this article, the experts will show you how to clean a grinder in five easy steps — with no muss and no fuss.
      And if a clean tool isn’t motivation enough for you, we’ll show you how to use the leftover plant matter to take your smoke sesh to the next level.
      Why You Should Clean Your Grinder
      1) Keeps You From Getting Sick
      Those nugs of bud we all love were once live plant matter. And even though they’ve been dried and cured, they will eventually start to decompose.
      That means bacteria will start to grow on any leftover kief in your grinder. And in case you were absent that day in middle school, bacteria can make you sick. Clean your grinder and stay healthy longer.
      2) Ensures The Smooth Operation Of Your Grinder

      Periodic cleaning ensures that your grinder will work smoothly when you need it most.
      Grinding cannabis is a sticky job, and some of that sticky icky will get stuck in your grinder. That can gum up the works and make your grinder not only harder to turn but less efficient to boot.
      More effort and less finely-ground grass? No thanks. We’ll clean our grinder, thank you.
      3) Helps Extend The Life Of Your Grinder
      Entropy is a harsh mistress, that’s for sure. Systems break down. Objects degrade. And the teeth on your grinder get dull. Damn you, entropy!
      But you can defy decay by cleaning your grinder regularly. This keeps the teeth sharp and the “turny mechanism” smooth and easy-to-use.
      And it really is worth the effort to give the finger to a property of thermodynamics (think about this when you’re high and you’ll understand).
      When You Should Clean Your Grinder
      Along with how to clean a grinder, many people wonder when to clean a grinder. The answer is every 30 to 60 days.
      That, of course, depends on how often you’re grinding. If you pulverize pot every day, the cannabinoids and terpenes (a.k.a. trichomes) will build up faster on the surface of your grinder and necessitate more frequent cleanings
      If you only grind your ganja once or twice a month, you can probably get away with cleaning it every 60 days.
      How To Clean A Grinder
      Grinders come in many different shapes, sizes, and materials. The first two variables aren’t really a concern when considering how to clean a grinder…unless it’s so big or so wonkily-shaped that it won’t fit in your freezer.
      If you find yourself in this situation, all we can say is, “Damn, son, send us a picture of that monster grinder!”

      The third variable — grinder material — is extremely important when trying to decide how to clean a grinder.
      Metals will rust when exposed to water. Acrylics and other plastics will dissolve, warp, and generally degrade when exposed to isopropyl alcohol.
      That’s why it’s imperative to figure out what your grinder is made of before you clean it. If you somehow managed to purchase a grinder with both plastic and metal parts, you’re basically screwed.
      No, not really. You just have to be extra careful and break the cleaning process down into more steps.
      We’ll explain how to clean a grinder made of metal and how to clean a grinder made of plastic in the step-by-step guide below. But first, let’s assemble our tools.
      Tools To Make The Job Easier
      Isopropyl alcohol (for metal grinders) Dish soap (for acrylic and plastic grinders) Hot water Freezer (optional but highly recommended) Large plate or plastic cutting board Container to hold the kief Toothbrush or soft paintbrush Toothpick, metal pick, or dab tool 5 Easy Steps To Clean A Grinder
      1) Disassemble Your Grinder

      Disassemble your grinder into as many small pieces as possible (without breaking it, of course).
      If you use a four-piece, three-chamber grinder, you’ll probably have a lid, the grinding chamber, the collection chamber, and the kief chamber. Two- and three-piece grinders will have fewer pieces (Duh!).
      Some grinders will have a removable screen between the collection chamber and the kief chamber. Be careful when you remove this screen. It’s fragile.
      Too much force or a sharp nail can break a hole in the screen that will render it about as useful as an ashtray on a motorcycle or a screen door on a battleship.
      2) To The Freezer!
      This step is optional, but it does make the next few steps so much easier.
      Place all the pieces of your grinder in the freezer for 30 minutes. This will harden all the sticky plant matter that’s clinging to the surface of your grinder.
      This is especially useful for dislodging every last bit of canna-goodness from the screen between your collection chamber and kief chamber.
      Handle your plastic grinder with care after you remove it from the freezer. Plastic becomes brittle at low temperatures.
      3) Tap, Brush, Scrape
      After removing the grinder parts from the freezer, hold them over a plastic cutting board and tap them gently against your hand or the surface of the cutting board.
      If you don’t have a plastic cutting board, a plate works just as well. Honestly, you just need a surface where you can collect the leftover plant matter. A cereal bowl or your partner’s belly works just as well.
      Next, brush all the surfaces of the grinder with a toothbrush or soft paintbrush. And just so you’re clear, we’re not talking a wall paintbrush. You’ll find it much easier if you use a watercolor paintbrush or something of similar size.
      If some stubborn gunk refuses to come off, scrape the area with a toothpick or dab tool.
      Just because it’s been living in your grinder for the past month, doesn’t mean it’s not still some good #&@$.
      This is the most labor-intensive part of the whole process, but the freezing makes it so much easier. You can skip the 30-minutes of freezer time if you want, but you’ll probably spend two, three, or four times as long trying to pick all the waxy stuff off your grinder.
      4) Bring On The Alcohol Or Water
      It’s at this point that how you clean a grinder will diverge into two different paths depending on whether you have a metal grinder or a plastic grinder.
      For metal grinders, submerge the pieces in a bowl or plastic baggie of isopropyl alcohol. This will kill any bacteria that might be hiding in the nooks and crannies.
      Feel free to agitate the bowl or baggie a bit to loosen up any stubborn plant matter. Then let everything soak until the liquid turns a light brown color or until a visual inspection shows that all the last particles have come loose.
      For plastic grinders, boil some water on the stove and then drop your grinder pieces into the pot. Reduce the heat to a gentle boil (so you don’t melt the freakin’ grinder, you pyro) and then leave the grinder in the hot water for one minute.
      Remove the grinder pieces from the liquid hot magma (a la Dr. Evil) with cooking tongs, and then set them on a towel to cool. Be sure to wait 10 minutes to give the pieces plenty of time to reach room temperature.
      5) Reassemble And Enjoy
      After the pieces of your grinder are cool, it’s time to reassemble and enjoy the fruits of your labor. Oooh! Feel how easy it turns? Isn’t that worth all the back-breaking work?
      The answer is yes.
      How To Use The Goo From Your Grinder

      Remember how we told you not to discard anything you remove from your grinder (DON”T DO IT!)? Here’s why.
      That stuff is pure, unadulterated kief. And it’s often of higher quality than the stuff you pull out on a regular basis because it was “fresher” when you ground your cannabis.
      So unless you’re grinding cheese or nuts between bouts of cannabis (in which case, eeew), don’t let this ganja gold go to waste.
      Not sure how to use the kief you get after cleaning your grinder? Here are a few suggestions:
      Decarboxylate it and mix it into your favorite edible Sprinkle a bit on your joint before you close Add a smidge to the bowl of your bong Roll your blunt in this fairy dust Use it to make weed tea The sky’s the limit on how you can use the kief you get after cleaning your grinder. Exercise your imagination and have fun. That’s what cannabis is all about.
  • Сейчас на странице   0 пользователей

    Нет пользователей, просматривающих эту страницу


4 516
Всего тем
134 940
Всего сообщений
31 059
Всего пользователей
7 510
Рекорд онлайна
Новый пользователь
Регистрация 27.02.2024 16:02


Вся информация предоставлена в ознакомительных целях для лиц старше 18 лет.

[Правила использования]